Knowledge Center

The collaborating companies of the Archime3 project (TYPSA, SALT Technologies and Hidtma) have completed the calibration stage of their numerical models, after a complex iterative...

CFD modelling First tests of the platform using CFD models to obtain performance parameters such as viscous damping and added mass....

ARCHIME3 Kick-off meeting for Phase 1 Presentation and common review of the different tasks to be carried out and the objectives to be achieved within the...

Laboratory campaign for platform optimization New physical model testing campaign in the ECOREL UPM tank (Madrid), for the study of new configuration alternatives and optimization of...

Stress analysis on the structure and dimensioning of the reinforcement for the 10 Mw turbine Estimation of the maximum values of the moments and stresses on...

Study of the mooring system from a coupled analysis of the platform using Orcaflex Studies and definition of installation of anchors and lines (Salt Technologies) Combinations of...

Hydrodynamic behavior of the structure for a 10 MW turbine (Seakeeping) with BEM model and Study of platform movement minimization using Wadam (Salt Technologies) The objective...